HEIL® CHS Series CHS121HGA0A00A Commercial Split System Heat Pump Unit, 10 ton Nominal, 106000 Btu/hr Heating BTU

HEIL® CHS Series CHS121HGA0A00A Commercial Split System Heat Pump Unit, 10 ton Nominal, 106000 Btu/hr Heating BTU

Brand: HEIL®
Part #: 94370
Customer Part #:
Coil Rating      :      28.1 sq-ft Face Area
Compressor Type      :      Scroll
Cooling BTU Rating      :      112000 Btu/hr
Dimensions      :      45-7/8 in L x 59-3/8 in W x 50-3/8 in H
EER Rating      :      11
Finish      :      Pre-Painted
Fins per Inch      :      17 FPI
Frequency Rating      :      60 Hz
HP Rating      :      1/4 hp
Heating BTU Rating      :      106000 Btu/hr
IEER Rating      :      12
Material      :      Steel
Nominal Capacity      :      10 ton
Number of Stages      :      1
Phase      :      3 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
Series      :      CHS Series
Sound Level      :      82 dBA
Temperature Rating      :      35 to 125 deg F
Voltage Rating      :      208/230 V
Wattage      :      8 kW

HEIL® Commercial Split System Heat Pump Unit, CHS Series, 10 ton Nominal Capacity, 112000 Btu/hr Cooling, 106000 Btu/hr Heating, 208/230 V, 8 kW Wattage, 1/4 hp, 60 Hz, 3-Phase, 1100 rpm Rotational Speed, Scroll Compressor, 12 IEER, 11 EER Rating, R-410A Refrigerant, 1 Stages, 82 dBA Sound Level, 28.1 sq-ft Face Area Coil, 17 FPI Fins per Inch, Steel, Finish: Pre-Painted, 35 to 125 deg F, 45-7/8 in L x 59-3/8 in W x 50-3/8 in H

  • Single stage cooling capacity control on 072 to 121 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of quiet operation
  • Comfort AlertTM Diagnostic Board
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre−painted exterior panels and primer−coated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125 deg F (52 deg C) and down to 35 deg F (2 deg C)
  • Outdoor temperature cooling operation range up to 125 deg F (52 deg C) and down to 35 deg F (2 deg C)
  • All units factory run tested
  • 5 Year compressor limited warranty
  • 1 Year parts limited warranty
  • Catalog https://assets.unilogcorp.com/267/ITEM/DOC/HEIL_CHS121HGA0A00A_Catalog.pdf

back To Top